Build Mid Century Modern Dining Tables
Build Mid Century Modern Dining Tables – In the 1950s produced many innovative furniture designers who worked with modern shapes and materials to create simple table design that became a huge home furnishings trend. The simplest is that already in the timber yard lay out the joists on the floor as you then want them in the table. Then you can mix different widths and make a tidy expression with flaws, bark and knots. Take a mobile image on the joists when you decided how they should be so that you remember the order when you get home.
Start by determining the size of mid century modern dining tables. Draw a line on the planks and cut to the right size. Now is the time to decide how worn table should be and it is entirely a matter of taste. When you step onto the joists with all your body weight, the stones will create scratches and pits. Another way is to turn on the joists with a hammer or with a heavy chain. Then grind the joists so any splinters and sharp edges disappear. Here you decide how fine or coarse you want the table surface. Try to grind the outer edges of the joists well so that it does not stick to clothes while sitting at the table. The smaller the gap is between the studs, the easier it will be to clean and wipe tables such as bread crumbs. Stain each plank individually so that even the sides treated before screwing them together.
Now is the time to assemble the joists at mid century modern dining tables. As the base to attach the joists in, I used plywood. I have been swan to three slices of plywood, about 30 x 85 centimeters in size and used one at each end and one in the middle of the table. This is so that the studs can sometimes be a little crooked and need to be held together tightly in several places to avoid gaps in the table. Place planks on the floor as you want them, with the top to the floor. If necessary, use a pair of forces to hold them together. Place the plywood and screw them into the studs.