How to Whitewash Wood Paneling
Whitewash wood paneling – Old wood panel can be instantly updated with a good paint job. Smooth over wood paneling can take old or worn out panels and give them new life. Karl also adds a rustic cottage charm of wood paneling. With a little white color homeowners can clear their own wood paneling. Clean wood panel with a mixture of water and detergent. Wipe the panels down with a clean cloth or sponge. This will help to clean the panels and better prepare them for painting.
Lightly sand the wooden panels with fine sandpaper. Using an electric hand sander will speed up the process. You do not have to completely sand the whitewash wood paneling, just enough to “roughen up” the surface of the panels in preparation for paint. When you have finished sanding, vacuum the panels and wipe with a tack cloth. Determine the type of cleansing the surface you want for your wood paneling. Applying a whitewash opaque surface will require a different grinding technique than a pickled surface where the wood fibers shows through the paint.
Apply a thin layer of latex paint primer to whitewash wood paneling with a brush. Brush primer on the panels and allow it to dry completely. If you want to see the wood grain show through the paint, you may want to skip this step and not to apply the primer. Paint the wooden panels with white latex paint. For a white-washed look, apply the paint with a brush in several thin coats, allowing each coat to dry before the next.